DALI-IRtech ꄲ MODULE ꄲ THERMAL IMAGING MODULE ꄲ MD16U Temperature Measurement Module

ꁆ ꁇ

MD16U Temperature Measurement Module

The MD16U human body temperature measurement thermal imaging module is developed by DALI manufactured uncooled microbolometer detectors. MD16U outputs data with a resolution of 120×322 in UVC mode. The pseudo-colour image and the temperature image are spliced up and down and output at the same time.

Detector Type	Uncooled microbolometer array sensor
Resolution	160×120
Pixel Pitch	17um
Pixel Pitch	17um
Frame Rate	≤12Hz（image and temp output at the same time） ≤14Hz（single image or temperature）
Image Calibration	Single point, two point, dead point replacement, etc., dynamic dead point correction, automatic gain and false color (can be turned off) are completed before leaving the factory
Output Interface	UVC
Control Interface	UVC
Temperature Range	30℃～40℃
Temperaure Accuracy	Inbuilt black body, ±0.3°C (ambient temperature 20°C~30°C)/±0.5°C (ambient temperature 10°C~40°C)
Temperature Measurement Range	0.5m
Distance Calibration	Support
Human Body Temperature Calibration	Support surface temperature / human body internal temperature
Temperature Data Output	120×322（Image and temperature stitching up and down） 120×162(Gray value or temperature data)
Working voltage	DC 4.4V～5.5V
Power consumption	0.8W(room temperature steady state), peak 2.5W
Working Temp	10℃～40℃
Storage Temp	-40℃～60℃
Dimension	70mm×40mm×53mm
Install port	2 M2 threaded holes on the bottom, 1 1/4'-20UNC threaded hole, 4 M2 threaded holes on the back
Lens	A thermalized fixed focus infrared lens
Focus	f3.85mm/F1.0
FOV	29.7°×38.9°
PC Software	Provide Windows version PC software, can view images, temperature measurement, etc.
SDK	Provide SDK, including data receiving, sending, parsing, output mode switching, filtering algorithm switch, automatic gain switch, pseudo-color calling and distance correction interface