DALI Thermal
Thermal Imagers SystemsDLSC-F series: Product description: Feature: full real-time display Front temperature measurement, accurate temperature measurement H.264 network video digital storage and transmission the interface is rich and convenient for integration Auto focus, preset position, infrared focal length Indoor...

-DLSC-Fxxx技术规格0.png

DLSC-F series:


Product description:


Feature:
●full real-time display
●Front temperature measurement,
●accurate temperature measurement
●H.264 network video digital storage and transmission
●the interface is rich and convenient for integration
●Auto focus, preset position, infrared focal length
 ●Indoor use, convenient and compact


technical parameter

item 

DLSC-F

Infrared detector

Detector type

Uncooled FPA

Resolution

384*288

640*480

Thermal image performance  

FOV/minimum focal distance

12°×9°/0.5m

15°×11°/1m

Spatial resolution  

0.67mrad

0.41mrad

sensitivity

≤0.06℃@30℃

frame rate

50/60Hz

Focusing  

auto/manual electric focus

Spectral range  

8~14μm

visible light performance  

Zoom  

30X

image resolution

1080P

Minimum illuminance  

0.005(Lux)

PTZ performance  

Horizontal rotation angle  

0°~360°

Preset  

support 255 presets

Loading mode and range of motion  

-90°~+90°

Temperature measurement  

Measurement range

-20℃~+650℃,UP to 1200℃

Accuracy  

±2℃ or ±2%

Calibration  

Auto/manual

Measurement mode  

Software setting

Image storage  

Original image collect

The back end manually collects single frame and 25 frame raw data images, and the collected data images can be analyzed and measured

Image storage

H.264 network video digital storage and transmission

Single image save, BMP format

Power supply system  

External power

220AC

consumption

≤75W(25℃ normal working)

Environment

Operating  temperature

-40℃~+65℃

Encapsulation  

IP54

humidity

≤90%(non-condesing)

Auto identification

As for thermal image collected (auto or manual) to auto identify, identify the target by using the method of image registration to ensure the effect of temperature detection.

False alarm  identification  

All of the temperature measurement based on effective target recognition, only measure the equipment marked, to auto remove the interference of outside heat source, to prevent false alarm.

Equipment management   

Establish the management system of all equipment, analyze the temperature measurement during auto cruise, when alarming, the specific failure site can be find out.

Auto cruise

128 presets, various auto cruise, realize the cruise, auto alarm, auto report

Auto warning

Auto alarm, include text message and voice message, to find the concrete alarm position

Reports  

The system can auto generate the temperature analysis report of single thermal image, auto record temperature measurement value, to reverse the temperature change in a period of time

Infrared panorama  

Provide wide field of view, high-precision, 360 degrees full view infrared map

Front end temperature measurement   

The front end temperature measurement not depend on the direct output temperature of the computer system, the temperature signal is directly superimposed on the video signal.

Dual FOV

With the thermal camera and visual camera, it can ensure that the two cameras monitor the same equipment location, also solve the problem the thermal camera is difficult to identify the installation location of equipment to make timely judgement.

Network low bandwidth  

Support low bandwidth operating mode, in the case of temperature data and image data, the bandwidth is not more than 0.8M

SDK

Instrument real time control development kit

Image processing development kit

Infrared image transformer equipment intelligent identification development kit

Client remote control development kit

Client WEB remote control development kit

Development support response  

Instant response, 24 hours on-site support, all Chinese support

Related Products
Hot Tags: thermal imagers systems, China, suppliers, manufacturers, wholesale, factory